Infrared Camera for Gas Leak Detection and Electrical Inspections

FLIR GF300is a preventative maintenance solution to spot leaks in piping, flanges and connections in petrochemical operations. The camera can rapidly scan large areas and pinpoint leaks in real time. It is ideal for monitoring plants that are difficult to reach with contact measurement tools.

Literally thousands of components can be scanned per shift without the need to interrupt the process. It reduces repair downtime and provides verification of the process. Above all it is exceptionally safe, allowing potentially dangerous leaks to be monitored from several meters away. FLIR GF300 will significantly improve your work safety, environmental and regulatory compliance, not to mention helping to improve the bottom line by finding leaks thatessentially decrease profits. The new GF3000 now embeds GPS data into the image allowing workers to pinpoint the location of the leak or hot spot.

Makes Reporting Easy

Images from FLIR GF-Series cameras are recordable to any off the shelf video recorder for easy archiving and documentation.

Imaging Performance
Field of view/min focus distance	24° x 18° / 0.3 m
Lens identification	Automatic
F-number	1.5
Thermal sensitivity/NETD	<25 mK @ +30°C
Focus	Automatic (one touch) or manual (electric or on the lens)
Zoom	1–8× continuous, digital zoom
Digital image enhancement	Noise reduction filter, scene based NUC, High Sensitivity Mode (HSM)
Focal Plane Array (FPA) / Spectral range	Cooled InSb / 3.2–3.4 μm
IR resolution	320 × 240 pixels
Sensor cooling	Stirling Microcooler (FLIR MC-3)
Electronics and data rate
Full frame rate	60 Hz
Image presentation
Display	Built-in widescreen, 4.3 in. LCD, 800 × 480 pixels
Viewfinder	Built-in, tiltable OLED, 800 × 480 pixels
Automatic image adjustment	Continuous/manual; linear or histogram based
Manual image adjustment	Level/span
Image modes	IR-image, visual image, High Sensitivity Mode (HSM)
Set-up
Menu commands	Level, span Auto adjust continuous/manual/semi-automatic Zoom Palette Start/stop recording Store image Playback/recall image
Set-up commands	1 programmable button, local adaptation of units, language, date and time formats
Storage of images
Image storage type	Removable SD or SDHC Memory Card, two card slots
Image storage capacity	> 1200 images (JPEG) with post process capability per GB on memory card
Image storage mode	IR/visual images. Visual image is automatically associated with corresponding IR image.
Periodic image storage	Every 10 seconds up to 24 hours
File formats	Standard JPEG, 14 bit measurement data included
GPS	Location data automatically added to every image from built-in GPS
Video recording and streaming
Non radiometric IR-video recording	MPEG4/H.264 (up to 60 minutes/clip) to memory card. Visual image can automatically be associated with corresponding recording of non-radiometric IR-video.
Non radiometric IR-video streaming	RTP/ H.264
Digital camera
Built-in digital camera	3.2 Mpixel, auto focus, and two video lamps
Digital camera video recording	MPEG/H.264 (25 minutes/ clip) to memory card
Laser pointer
Laser	Activated by dedicated button
Data communication interfaces
USB	USB-A: Connect external USB device (e.g. memory stick) USB Mini-B: Data transfer to and from PC
USB, standardVideo	USB Mini-B: 2.0 High Speed
Video	Digital Video Output (image)
Power system
Battery type	Rechargeable Li Ion battery
Battery voltage	7.2 V
Battery operating time	> 3 hours at 25°C and typical use
Charging system	In camera (AC adapater or 12 V from a vehicle) or 2 bay charger
Charging time	2.5 h to 95% capacity, charging status indicated by LED's
Start-up time	Stirling cool down: < 5 min. @ 25°C